Description

Original hexagonal auger for Moulinex meat grinder | XF911101

XF911101 auger – the heart of your meat grinder

The auger is the component that pushes the meat forward toward the knife and the mesh.
Without a proper auger, the meat grinder simply cannot process meat properly.
Replacing with a genuine part ensures a full return to optimal performance and smooth grinding.

Thousands of customers have already solved this problem

The certified technicians at the official service point out that the auger is one of the most requested spare parts for the Moulinex HV grinder series.
Meat that is compressed and does not advance, a squeaking sound during operation, or meat that comes out with uneven pressure
These are all clear signs that it is time for a replacement.
Make sure it fits your model. Click the “Check Model Compatibility” button at the top of the page before ordering.

When is the snail replaced?

The auger in the meat grinder works under great mechanical stress with every operation. Therefore, it wears out over time. It is worth replacing the auger when:

✅ The meat is compressed inside the body and does not advance past the mesh.
✅ A squeaking or whistling sound is heard during operation
✅ The grinding is uneven – some of the meat comes out coarse and some is fine.
✅ Visible wear can be observed on the snail's teeth

⚠️ Continued use of a damaged auger may cause overload on the motor and irreversible damage to the grinder.

Why is it important to use only original parts?

The XF911101 auger is manufactured with mechanical precision to fit the inner diameter of the HV series grinder body.
A non-original part may be too wide, too narrow, or too short – which will cause improper friction, meat souring, and damage to the device's integrity.

In our experience at Moulinex official service laboratories, an original auger lasts for many years when properly cleaned after each use.

How do you identify your device model?

💡 tip: You will find the model number of the meat grinder on a sticker on the bottom of the product.
The model number is essential to ensure that the snail is exactly compatible with your device. Click the “Check Model Compatibility” button at the top of the page.

Technical

FAQ

How do you know when you need to replace the snail in your meat grinder?

Common signs are meat stuck in the grinder body and not moving forward, a squeaking sound during operation, and uneven grinding.
When visible wear can be observed on the worm teeth – this is a clear signal for immediate replacement to protect the engine.

Is the XF911101 auger suitable for all Moulinex HV models?

The snail is suitable for the HV2, HV3, HV4, HV6 and HV8 series, as well as the Masterchef Gourmet series.
Because there are variations between different models, it is important to verify compatibility by the model number listed on the bottom of the device before ordering.

What is the difference between an original snail and a non-original one?

An original worm is manufactured to the exact dimensions of the HV grinder body and ensures minimal friction and maximum life.
An unapproved part may not fit exactly, cause strain on the motor, and damage the long-term integrity of the device.

How do you disassemble and assemble the snail?

The grinder must be disconnected from the power supply and the grinding head must be disassembled.
Then remove the mesh, the knife, and pull the old snail out. Insert the new snail, and assemble in reverse order.
Thorough cleaning before assembly will extend the life of the component.

What is the length of the XF911101 snail and how do I make sure it is correct for my model?

Total length: 114 mm, working length: 62 mm.
Before purchasing, check the full model number on the bottom of the device and click “Check Model Compatibility” at the top of the page.
If your model belongs to the HV2–HV8 or Masterchef Gourmet series – the snail is suitable.

🎁 Upgrade your grinding experience – complementary products

Customers who purchased the XF911101 Snail were also interested in the following products:

Grinding knife

• To purchase an original knife for the Moulinex ADR901 meat grinder – click here
  Original stainless steel knife for precise and even cutting. Suitable for HV3 and HV6 models.

💡 The perfect combination: Replacing the auger + knife together returns the grinder to its first-day performance.

⏱️ Delivery times:

• Most localities: within 10 business days
• Golan Heights, Arava, Eilat and settlements beyond the Green Line: within 10 business days