Description

Original top cover for freezer drawer 6-8 drawers Bloomberg | 4384641800

Original top cover (Drawer Front) for the Bloomberg freezer – a quality spare part to restore the freezer to perfect condition.
The part fits Bloomberg FNT series freezers with 6 to 8 drawers, ensuring a precise fit and a factory-new look.

⚠️ Just before ordering – safety above all!
To ensure a successful repair and maintain the longevity of the device,
It is mandatory to use only original parts..
Non-original parts may cause damage and void the warranty.
Now click the 'Check Model Compatibility' button at the top of the page.
Our system will immediately confirm that the part is suitable for you.

🔧 Why replace the freezer drawer cover?

Have you noticed that the front of your freezer drawer Cracked, broken, or yellowing?
Daily use of the freezer, ice buildup, or accidental bumps can damage the plastic cover.

In our experience at official service laboratories, one of the most common reasons for damage to the drawer front is
She Excess ice buildup Which causes pressure on the plastic when pulling the drawer.

Signs it's time to replace:

• ✅ Cracks or breaks in the plastic cover
• ✅ Loose or broken grip handle
• ✅ Yellow spots or permanent discoloration
• ✅ Difficulty opening and closing the drawer smoothly
• ✅ Damage to the aesthetic appearance of the freezer

✨ Why an original piece from Bloomberg?

An original Blomberg spare part guarantees:

• perfect match – The part is manufactured to the same dimensions as the original, so it fits “in place” without the need for adjustments.
• High durability – High-quality plastic resistant to extreme freezing temperatures of up to -24°C
• Excellent transparency – Allows you to clearly see the contents of the drawer without unnecessary opening
• Maintaining responsibility – Using original parts maintains the validity of the freezer's warranty.

Customers who purchased this part praised the ease of installation and the high quality of the plastic.

🛠️ Simple self-installation – no need for a technician

Replacing the drawer cover is a simple operation that you can do yourself in just a few minutes:

1. Pull out the drawer. From the freezer gently
2. Remove the old cover. – It is usually attached with plastic clips
3. Install the new cover. – Press until it clicks.
4. Put the drawer back. To its place in the freezer

⏱️ Estimated installation time: only 5-10 minutes

💡 Tip from the experts: Before replacing, it is recommended to defrost the freezer if there is significant ice buildup around the drawers.
This will prevent unnecessary pressure on the new part.

📍 How to find the model number of the freezer?

The model sticker on Bloomberg freezers is usually located:

• On the inside wall of the freezer (left or right side)
• On the back of the device
• Under the bottom drawer

The model number starts with the letters FNT followed by 4 digits (for example: FNT3668).

📋 Technical specifications

Model compatibility

⚠️ It is important: Even if your model is listed,
It is recommended to ensure complete compatibility. Using the compatibility check button at the top of the page.

❓ Frequently Asked Questions (FAQ)

Does the part fit my freezer model?

Click the 'Check Model Compatibility' button. at the top of the page and enter your model number.
The system will immediately confirm if the part is suitable.

Is this an original part?

Yes, absolutely! This is a genuine Blomberg replacement part, manufacturer part number 4384641800.
We commit to providing only original parts from the official importer.

Can I replace the cover myself?

Yes. Replacing the drawer cover is a simple operation that does not require any special tools or technical knowledge.
Installation only takes about 5-10 minutes.

Is the bottom drawer cover different from the top?

Yes, pay attention. – This cover is for the top drawer.
If you need a cover for a different drawer, check the specific part number for that drawer.

Why did the facade crack?

Common causes: ice buildup that causes pressure, bumps when opening/closing, or natural wear and tear over the years.
It is recommended to defrost the freezer periodically to prevent ice buildup.

💡 Preventive maintenance tip

To extend the life of your drawer cover and prevent future cracks:

• Defrost the freezer periodically (every 3-6 months) to prevent ice buildup.
• Open and close the drawers gently.
• Don't overload the front with products that put pressure on it.
• Clean the cover with a damp cloth and mild cleaning fluid – avoid abrasive materials.

Looking for more spare parts for your Bloomberg freezer? We offer a wide range of original parts including drawers, seals, shelves and more.
Contact our service team for any questions!