Description

Original door container for Blomberg bottom freezer refrigerator | 5714630200

Original Bloomberg refrigerator door container – the part that restores order and comfort to your refrigerator door.
Designed for bottom freezer models from the KND39 series,
The transparent container fits perfectly and allows for convenient storage of bottles, jars, and small products.
✅ Only a genuine part ensures a precise fit and long-lasting quality.

⚠️ Just before ordering – make sure it fits the model!

To ensure the container fits your refrigerator exactly, it is mandatory to check the full model number.
Non-original parts may not fit properly, break more quickly, and damage the door's organization.
Now click the 'Check Model Compatibility' button at the top of the page. And our system will immediately confirm that the part is suitable for your refrigerator.

Why does the door seal break and when should it be replaced? 🔍

The door container in the refrigerator is one of the parts that absorbs the most load on a daily basis.
Heavy milk bottles, jam jars, and drinks create continuous pressure on the plastic.
From our experience at Bloomberg's official service labs,
The most common faults are:

• ⚠️ Cracks in the walls – Caused by overload or light blows when closing the door
• ⚠️ Breaking the hanging headphones – Prevents the container from hanging properly on the door rails
• ⚠️ Heat distortion – Happens when hot products are placed directly on the container
• ⚠️ Plastic disintegration – Result of prolonged use and natural wear and tear

Signs that it's time to replace: The tank is wobbling, not sitting firmly, has visible cracks, or it simply breaks.

Why an original Blomberg door container? ✅

Choosing an original Bloomberg container guarantees you:

• ✅ Exact fit – The dimensions and latches match the door rails on KND39 models exactly,
  and work in harmony with the cooling system Dual Active No Frost Maintains a uniform temperature even in the door area
• ✅ High quality food-safe plastic – Resistant to low temperatures,
  Compatible with the cooling environment of the system BIOCC and does not release harmful substances
• ✅ Durability over time – Material that undergoes strict quality control by the manufacturer,
  Optimized for continuous operation alongside technologies such as hygAir Which produces ions inside the refrigerator
• ✅ Maintaining responsibility – Using non-original parts may void the warranty.

Our certified technicians indicate that non-original door seals tend to break faster and do not always fit properly,
Which causes the bottles to fall or the container to come loose.

How do you replace the door seal? 🛠️

Replacing a door seal is a simple operation that you can do yourself in just a few minutes:

1. ✅ Open the refrigerator door
2. ✅ Lightly lift the old tank and slide it upwards to release it from the clips
3. ✅ Place the new tank on the rails and lower until it locks.
4. ✅ Make sure the container sits firmly and does not wobble.

💡 Expert tip: Before installation, clean the rails with a damp cloth to remove food residue that may interfere with the proper seating of the container.

Where to find the model number of the refrigerator? 📋

On Bloomberg bottom freezer refrigerators , the model sticker is usually located in one of the following locations:

• 📍 On the left inner wall of the refrigerator compartment
• 📍 On the inner sill of the refrigerator door (at the top)
• 📍 Behind the vegetable drawer At the bottom of the refrigerator compartment

Look for a sticker that says “Model” – there you will find the code that starts with KND.

🔧 Preventive maintenance tip

To extend the life of refrigerator door containers:

• ✅ Avoid overloading – don’t put too many heavy bottles on one container
• ✅ Close the refrigerator door gently, without slamming it – closing it forcefully also damages the tightness that allows the technology to work. Blue Zone
  Keep vegetables fresh
• ✅ Clean the containers occasionally with a mild soap solution
• ✅ Check every few months that the latches are intact and the container is stable.

Technical specifications 📐

Compatible models ✔️

The container is suitable for Blomberg refrigerators from the bottom freezer series:

⚠️ It is important: Even within the same series there may be differences.
Click the 'Check Model Compatibility' button. To ensure an exact fit, please use your full model number.

Frequently Asked Questions ❓

Q: Does the tank fit my model?

A: The tank is suitable for models KND3955, KND3956, KND3958, KND3965 and KND3968.
To be completely sure, click the 'Check Model Compatibility' button. at the top of the page and enter the full model number.

Q: Is this an original product?

A: Yes, this is a genuine Blomberg spare part, manufacturer part number 5714630200.
We only supply original accessories and spare parts. To ensure a perfect fit and long-lasting quality.

Q: Can I install it myself?

A: Absolutely! Installation is very simple and requires no tools.
Simply remove the old tank and insert the new one until it locks onto the rails.

Q: How long is the tank supposed to last?

A: A high-quality original container will last for many years with reasonable use.
Our recommendation It is important to avoid overloading and slamming the door hard to extend the life of the tank.

Q: What is the difference between an original container and a non-original part?

A: Non-genuine parts may be made of lower quality plastic, may not fit the exact dimensions, and may break more quickly.
Original part Ensures perfect fit and durability at cooling temperatures.