Description

Original charcoal filter for Delonghi CHG-637 hood | 9FIL007001

The original DeLonghi charcoal filter is designed to filter cooking odors from steam cookers operating in recirculation mode.
The activated carbon inside captures odor molecules and returns clean, pleasant air to the kitchen.
Periodic replacement ensures optimal performance and extends the life of the hood.

DeLonghi activated carbon technology – this is how it works

The original DeLonghi carbon filter contains high-quality activated charcoal, which has undergone a special process to create millions of tiny pores.
These pores act as a trap for odor molecules in a process called adsorption.
As cooking air passes through the filter, odor molecules are adsorbed to the surface of the charcoal.
As a result, the air coming out of the hood is free of frying and cooking odors.

Unlike unapproved replacements, the original filter is precisely matched to the dimensions and holding mechanism of the CHG-637 hood.
Therefore, it easily fits into place and ensures a gap-free seal.
When the hood operates in circulation mode, meaning without an exhaust pipe to the outside, the charcoal filter is the only component that prevents cooking odors from spreading throughout the house.

✅ From the experience of certified technicians at the official service, periodic replacement of the charcoal filter prevents overloading of the extractor motor.
An engine repair can cost hundreds of shekels. Therefore, a small investment in a genuine filter saves expensive repairs in the future.

⚠️ To check exact compatibility for your model, click the “Check Model Compatibility” button at the top of the page.

📋 Technical specifications

✅ Compatible models

The part fits the following model (make sure it matches the model number on the collector sticker):

• CHG-637

You will find the model number of the range hood on a sticker on the inside of the hood.
Remove the aluminum filters (grease screens) and look for a white sticker on the inner wall or upper lip.
The model number is essential to verify filter compatibility before ordering.

⚠️ To check exact compatibility for your model, click the “Check Model Compatibility” button at the top of the page.

🔧 Installation instructions

Installing the filter is simple and does not require tools:

1. ⚠️ Make sure the hood is turned off and unplugged.
2. Remove the aluminum filters (grease screens) from the hood.
3. Locate the filter holders behind the grilles.
4. Remove the old filter and put the new filter in its place.
5. Make sure the filter is securely in place.
6. Put the aluminum filters back in place.
7. Connect the collector to the power supply and turn it on for testing.

⏱️ Estimated time: 5 minutes

💡 Tip from the experts

It is recommended to replace the charcoal filter every 3 to 6 months, depending on the frequency of cooking.
In an active kitchen where cooking and frying is done frequently, it is a good idea to replace every 3 to 4 months.
It is important to know that a charcoal filter cannot be cleaned or washed. When it is saturated, it must be replaced with a new one.
Signs to replace: cooking odors that remain in the kitchen after turning on the hood, decreased suction efficiency, or unusual noise from the motor.

❓ Frequently Asked Questions

How often should a Bekolet steam generator carbon filter be replaced?

It is recommended to replace the carbon filter every 3 to 6 months.
In an active kitchen with frequent cooking and frying, it is recommended to replace every 3 to 4 months.
When the filter is saturated, it loses its absorption capacity, so cooking odors remain in the kitchen.
Some batteries have a warning light that indicates when it is time to replace them.

What does a Bekolot steam charcoal filter do?

The charcoal filter neutralizes cooking and frying odors through an adsorption process.
The activated carbon captures odor molecules from the air and returns clean air to the kitchen.
For this reason, the filter is especially essential for cooker hoods that operate in recirculation mode, i.e. cooker hoods that are not connected to an external exhaust pipe.

What is the difference between a charcoal filter and an aluminum filter?

The aluminum filter (grease mesh) captures grease particles and prevents them from reaching the intake motor.
It should be cleaned in the dishwasher once every two months. In contrast, the charcoal filter neutralizes odors using activated charcoal.
Unlike the aluminum filter, the charcoal filter cannot be cleaned and must be replaced when it becomes clogged.

Why doesn't the hood vacuum well?

A decrease in suction efficiency is often due to a saturated carbon filter that needs to be replaced, or a clogged aluminum filter that needs to be cleaned.
Additionally, it is worth checking that there is no blockage in the exhaust pipe if the hood is connected to the outside.
Replacing the carbon filter and cleaning the aluminum grilles solves most common problems of decreased performance.

Is a non-original charcoal filter suitable for my range hood?

Non-original filters may not fit the hood dimensions exactly, causing gaps and odor leakage.
Additionally, they may contain low-quality activated carbon and impair filtration efficiency.
The original DeLonghi filter is precisely matched to the CHG-637 hood and ensures full filtration performance throughout the entire period of use.

⏱️ Delivery times:

• Most localities: within 6 business days
• Golan Heights, Arava, Eilat and settlements beyond the Green Line: within 8 business days