Description

Original locking pin spring for the freezer compartment door for a Bloomberg refrigerator | SKU 4862510400

Original Blomberg locking pin spring for the inner freezer compartment door in the refrigerator.
This spare part ensures a tight closure of the freezer compartment door, prevents cold air from leaking in and maintains a uniform temperature in the freezer.
Suitable for the KQD1250 model and other models in the series.

⚠️ Just before ordering – safety above all!

To ensure a successful repair and maintain the longevity of the refrigerator, It is mandatory to use only original parts..
Non-original parts may cause damage to the locking mechanism and void the warranty.
Now click the 'Check Model Compatibility' button. at the top of the page and our system will immediately confirm that the part fits your refrigerator.

🔧 Why doesn't the freezer compartment door close like it used to?

Have you noticed that the inner freezer compartment door does not close tightly? Does the door stay slightly open or have difficulty closing?
These signs indicate a worn or broken locking pin spring.

This small spring plays a critical role in the freezer compartment door locking mechanism.
When the spring loses its spring force or breaks, the door does not close properly.
The result? Cold air escapes from the freezer compartment, the compressor works overtime, and the electricity bill increases.

🧊 Signs that indicate a faulty spring:

• ✅ The freezer compartment door does not stay closed.
• ✅ Unusual ice buildup in the freezer compartment
• ✅ Refrigerator “struggles” and works continuously
• ✅ Unstable temperature in the freezer compartment
• ✅ Unusual noise from the refrigerator (compressor overworking)

✅ Why an original piece from Bloomberg?

From our experience in official service laboratoriesNon-genuine replacement parts for locking springs tend to wear out 3 times faster than a genuine part.
The reason? The original spring is made High quality stainless steel Designed to withstand thousands of opening and closing cycles.

Our certified technicians indicate Most recurring faults in freezer compartment doors are caused by the use of non-original parts.
Genuine part guarantees:

• 🔹 perfect match – Precise dimensions for the locking mechanism
• 🔹 Long-term durability – Corrosion-resistant stainless steel
• 🔹 Maintaining responsibility – Using an original part does not affect the manufacturer's warranty.
• 🔹 Optimal performance – Precise jumping force as originally designed

📍 Where do you find the model number on a Bloomberg refrigerator?

To ensure a perfect fit, locate the Model sticker In your refrigerator.
On Bloomberg bottom-freezer refrigerators like the KQD1250 model, the sticker is typically located:

1. On the left inner wall of the refrigerator compartment
2. Behind the vegetable drawer At the bottom of the refrigerator
3. At the back of the refrigerator (Must be moved slightly away from the wall)

Tip: Take a photo of the sticker for future use – this way you will always have the model number at hand.

🛠️ Simple self-installation

good news! Replacing the locking pin spring is a simple operation that can be performed at home without special tools.
Installation only takes about 5-10 minutes.

Installation steps:

1. Open the freezer compartment door. – Locate the locking mechanism
2. Remove the old spring. – Gently pull the worn spring
3. Install the new spring. – Put the original spring in place.
4. Check the door operation. – Make sure the door closes and opens smoothly.

Customers who purchased this part praised the ease of installation – most completed the replacement in less than 10 minutes!

📋 Technical specifications

💡 Expert tip: Preventive maintenance

To extend the life of the spring and locking mechanism, we recommend:

• Clean the locking area. Once a month with a damp cloth
• Avoid slamming the door. – Gentle closing extends spring life
• Check the gasket. – A proper door seal reduces the load on the locking mechanism.
• Don't overload the door. – Avoid storing heavy items on the freezer door.

❓ Frequently Asked Questions

Does the spring fit my model?

Click on 'Check Model Compatibility' button at the top of the page to verify immediate matching.
The spring is designed for the KQD1250 model and other models in the Bloomberg series.

Is this an original product?

Yes, absolutely! This is an original Blomberg part, manufactured by the Turkish Arçelik Group.
We are the official importer and official service provider – Only original accessories and spare parts.

Can I replace the spring myself?

Absolutely! This is a simple replacement that does not require any special tools or advanced technical knowledge. Installation only takes about 5-10 minutes.

How often should the spring be replaced?

An original spring usually lasts for many years. Replace only when signs of wear appear – a door that doesn’t close properly or a spring that looks stretched or broken.