Description
Original inverter control VMH1113Y for Bloomberg freezer 7-8 drawers | 5816191900
⚠️ Just before ordering – safety and reliability above all!
Inverter control card is The electronic brain of the freezer and a critical component that requires precise professional installation.
A non-original part may cause a short circuit, irreparable damage to the freezer and endanger your safety!
To ensure a safe, proper, and successful repair that will keep your freezer running for many years,
It is strongly recommended to coordinate a qualified technician from the official service. To install the part.
The cost of a technician visit is Only 290 NIS – A small investment for great peace of mind!
👨🔧 Click here to schedule a certified technician from the official service
Before ordering, you must verify compatibility with your model:
Now click the button 'Model Compatibility Check' at the top of the page and our system will immediately confirm that the part is suitable for your freezer.
Has your freezer stopped cooling? The problem may be with the control board
From our experience at Bloomberg's official service labs,
The inverter control card is one of the most critical components in modern freezers..
When it breaks down, the symptoms are clear:
The freezer is not cooling properly, the compressor is not starting, error codes appear on the display, or the freezer simply does not turn on.
VMH1113Y command card It is the original Bloomberg part for 7-8 drawer freezers with an inverter motor.
This is an advanced electronic component that is responsible for managing the compressor's operation, controlling the temperature, activating the defrost systems, and protecting against voltage surges.
Why only an original command card?
Our certified technicians emphasize: A non-original inverter control card is a real danger.
The reasons:
✅ Short circuit prevention – Original card has undergone rigorous testing for the voltage and frequency of the Israeli electrical grid
✅ Perfect compatibility with the inverter compressor – Only an original part fits exactly the engine parameters
✅ Long-term freezer protection – Original part guarantees years of service life
How do you identify a fault in the control card?
The most common signs our technicians detect:
🔴 The freezer is not cooling. – The temperature rises and the food begins to defrost
🔴 The compressor does not start. – The characteristic hum of the compressor is not heard.
🔴 Error codes – Codes such as E13, E9 or other codes appear on the display
🔴 Intermittent operation – The freezer turns on and off randomly
🔴 No response to control buttons – The digital panel is unresponsive
pay attention: Most control card failures are caused by voltage spikes in the electrical grid – a common phenomenon in Israel.
The original command card contains advanced protections, but after a strong voltage surge it may be damaged.
⚠️ Important! Professional installation is a must
The inverter control card is a complex electronic component that requires professional installation only . The reasons:
- Precise wiring – A connection error will cause irreversible damage to the freezer.
- Calibration and adjustment – The card requires calibration for the specific compressor
- Safety tests – A certified technician performs voltage and current tests
- Further diagnosis – Sometimes the problem also stems from other components.
Cost of a technician visit from the official service: 290 NIS
👨🔧 To schedule a technician, click here
How do you find your freezer model?
The model sticker on Bloomberg upright freezers is usually found in one of the following locations:
📍 On the inner side wall of the freezer – open the door and look on the right or left side
📍 On the interior ceiling of the freezer compartment
📍 Behind the freezer – On the back wall (the device must be moved carefully)
On the sticker you will find the model number (for example: FNT3676) and the serial number.
Important technical details
The VMH1113Y control card is compatible with Bloomberg freezers with Innovative inverter motor
Technology that provides more efficient cooling, quiet operation and significant electricity savings.
The inverter motor adjusts its speed as needed, unlike traditional compressors that operate only in ON/OFF mode.
Technical
| attribute | value |
|---|---|
| Manufacturer's SKU | 5816191900 |
| Command model | VMH1113Y 230V 50Hz |
| brand | Blomberg Blomberg |
| Compatible models | FNT3676, FNT3686 |
| Device type | 7-8 drawer freezer with inverter motor |
| Working voltage | 220-240V |
| frequency | 50-60Hz |
| current | 1.5A |
| Installation type | Requires professional installation – a certified technician is highly recommended |
| Match | For freezers with inverter compressor only |
| Level of complexity | High – requires advanced technical knowledge |
Frequently Asked Questions (FAQ)
Q: Is this control card suitable for my freezer?
A: The card is compatible with Bloomberg freezers models FNT3676 and FNT3686 (7-8 drawers) with an inverter motor.
For an accurate check, click the 'Check Model Compatibility' button at the top of the page or check your model number on the freezer sticker.
Q: Is this a genuine Bloomberg product?
A: Yes! This is a 100% original Bloomberg replacement part, with manufacturer part number 5816191900.
Only an original part guarantees complete integrity, safety, and a perfect fit for your freezer.
Q: Can I install the card myself?
A: Absolutely not recommended. An inverter control card is a complex electronic component that requires advanced technical knowledge, professional tools, and precise calibration. Incorrect installation may cause permanent damage to the freezer and the risk of a short circuit..
It is strongly recommended to coordinate a qualified technician from the official service.
Cost of visit: 290 NIS. To schedule, click here.
Q: What is the delivery time?
A: Delivery times vary depending on your area of residence. For detailed information on delivery times, click here.
Q: What happens if there are other problems with the freezer?
A: Sometimes a fault in the control card stems from another source (for example, repeated voltage spikes or a problem with the compressor).
A qualified technician will perform a comprehensive diagnosis and ensure that the repair is complete and comprehensive. This is another important reason why it is worth calling a professional technician.
Q: How much does it cost to repair a control card with a technician?
A: The cost of a technician visit from the official service is 290 NIS, which includes initial diagnosis and basic installation.
If additional parts are needed, the technician will give you an accurate price quote on the spot.
🔧 Need help? Our certified technicians are here for you!
Click here to schedule a certified technician from the official service.























