Description

Original bowl lid for Moulinex Double Force food processor | MS-650523

The bowl lid is an original Moulinex spare part, designed for the Double Force food processor series.
The lid is made of durable transparent plastic and is equipped with an Easy Lock mechanism for quick and easy locking.
Replacing a damaged lid with an original part returns the food processor to full and safe functioning.

Easy Lock System: Why the original lid is the right solution

Moulinex Double Force series food processors are equipped with the exclusive Easy Lock system, which allows the lid to be locked along several points around the circumference of the bowl.
An original lid is precisely designed to work with this mechanism.
As a result, using a non-genuine part may damage the lock and prevent the food processor from operating at all, because the safety mechanism responds to an inaccurate lock.

✅ Transparent plastic allows you to monitor the processing process without opening the lid

✅ The food insertion slot during operation only fits the dimensions of the official models.

✅ Against pressure created when processing hard and doughy vegetables

✅ Heat-resistant, easy to clean and dishwasher safe

⚠️ A non-original part may disrupt the Easy Lock mechanism and prevent the device from operating. It may also damage the device's integrity over time.

The model number of your food processor can be found under the base of the appliance. The model number is essential for verifying part compatibility before ordering.

📋 Technical specifications

✅ Compatible models

The part fits the following models (make sure it matches the model number on the sticker):

• FP821811
• FP821827
• FP822110
• FP822127
• FP824H10
• FP824H27
• FP825E10
• FP825E27
• FP826H10
• FP826H27
• FP827E10
• FP827E27
• FP828H10
• FP828H27

To check exact compatibility for your model, click the “Check Model Compatibility” button at the top of the page.

🔧 Lid replacement instructions

Replacement is simple and requires no tools. Replacement time: approximately 2 minutes.

⚠️ Unplug the food processor from the power supply before starting the replacement.

1. Lift the old lid up and remove it from the bowl.
2. Check that there is no food residue on the rim of the bowl before assembling.
3. Place the new lid on top of the bowl so that the insertion slot is facing outward.
4. Gently press along the perimeter of the lid until you hear a locking click.
5. Make sure the lid is securely locked before connecting the device to the power supply.

💡 Tip from the experts

In our experience at Moulinex official service laboratories, a lid that breaks is most often damaged at the locking point due to incorrect opening.
To extend the life of the new lid, always open it by pressing the release tab and not by pulling forcefully.
Cleaning the lid after each use prevents residue buildup that exacerbates the pressure on the locking mechanism.

❓ Frequently Asked Questions

Why won't the Moulinex food processor start at all?

The most common cause is a lid that is not properly locked.
Double Force food processors are equipped with a safety sensor that prevents operation when the lid is open or damaged. Make sure the lid is locked all the way around.
If the problem persists after locking, the lid may be damaged and needs to be replaced.

How do you replace a bowl lid in a Moulinex food processor?

The replacement does not require tools and takes about two minutes.
First, unplug. Then, lift off the old lid, clean the rim of the bowl, place the new lid on, and gently press along the perimeter until you hear a click.
Make sure it is fully locked before connecting to power.

Is the MS-650523 lid suitable for the FP822110 model?

Yes. The MS-650523 lid fits the FP822110/870 model and a variety of other Double Force models.
However, it is recommended to verify the full model number that appears under the base of the device, as there are differences between sub-models within the same series.

Where do you find the model number of a Moulinex food processor?

The model number is listed on the sticker under the base of the device.
It is important to check the full model number (for example: FP822110) and compare to the list of compatible models before placing an order.

What is the difference between an original lid and a non-original part for a Moulinex food processor?

An original lid manufactured to Moulinex's exact specifications and adapted to work with the Easy Lock mechanism.
A non-genuine part may lack dimensional accuracy and disrupt the locking points, so that the food processor will not respond to pressing the button.
In addition, an unapproved part may damage the integrity of the device over time.

⏱️ Delivery times:

• Most localities: within 6 business days
• Golan Heights, Arava, Eilat and settlements beyond the Green Line: within 8 business days