Description

Original compressor for Blomberg 7-8 drawer freezer | SKU 5816170400

Original Blomberg compressor for FNT series freezers.
This critical component is the heart of the refrigeration system, responsible for compressing the gas and producing cold in the freezer.
Suitable for models FNT3676 and FNT3686.

⚠️ Very important! This product requires installation by a qualified official service technician

The compressor is the most complex component in the freezer and replacing it requires high professional skill.
The work includes refrigerant gas treatment (R600a), copper pipe soldering, electrical work, and vacuuming the system.
Do not perform independent installation - danger to life!

📞 To schedule a certified official service technician, click here

Cost of a technician visit: 290 NIS

🔔 Just before ordering – safety above all!

To ensure a successful repair and maintain the safety of the freezer, it is mandatory to use only an original compressor.
A non-original compressor may not be compatible with the cooling system, cause repeated malfunctions, and even endanger safety.
Now click the 'Check Model Compatibility' button at the top of the page. And our system will immediately confirm that the part fits your freezer model.

What is a compressor and why is it so important?

❄️ The heart of the cooling system

The compressor is The most central and essential component in the freezer.
Its function is to compress the refrigerant gas and create the refrigeration cycle that freezes the food. Without a proper compressor, the freezer simply won't work.

Our certified technicians state that a properly functioning compressor ensures:

• 🔹 Efficient and fast freezing – Maintaining a temperature of minus 18 to minus 24 degrees
• 🔹 Quiet operation – A high-quality compressor works almost completely silently
• 🔹 Saving electricity – High energy efficiency
• 🔹 Long lifespan – Original compressor lasts for many years

Signs of a freezer compressor malfunction

🔧 When should the compressor be replaced?

From our experience at official service laboratories , the following signs indicate a possible compressor malfunction:

• ⚠️ The freezer is not freezing. – The food defrosts and the temperature rises
• ⚠️ Unusual noises – Clicking sounds, loud buzzing or vibrations
• ⚠️ The compressor starts and stops. – Tries to work but turns off after seconds
• ⚠️ The compressor does not start. – Completely silent, no engine noise
• ⚠️ Overheating – The compressor is very hot to the touch.
• ⚠️ Error codes on the display – Cooling-related error messages

pay attention: Not every refrigeration fault indicates a faulty compressor.
Only a qualified official service technician Can accurately diagnose if the compressor is the source of the problem.

📞 To schedule a professional diagnosis by a certified technician

Why is it important to use an original Blomberg compressor?

🛡️ Advantages of the original compressor

A non-original compressor may cause irreversible damage to the freezer.
The original Blomberg compressor is manufactured to strict standards and precisely matched to the freezer's cooling system.

• 🔹 perfect match – Includes brackets, piping and electrical connections
• 🔹 Accurate power – Exactly matches freezer volume and cooling load
• 🔹 Compatible refrigerant gas – Works with R600a in the exact amount
• 🔹 Long-term reliability – High quality for years of proper operation

This is one of the most critical replacement parts – don’t settle for a non-genuine compressor!

How to find the model number of the freezer?

📍 Location of the model sticker on the Blomberg freezer

Before ordering, it is important to make sure the part fits your freezer model.
The model sticker on Blomberg freezers is usually located on the inside wall., on the top or side of the freezer compartment.
Open the door and look for a label with the model number that begins with the letters FNT.

💡 Tip: Click the 'Check Model Compatibility' button at the top of the page and enter the model number - the system will immediately confirm compatibility.

🚨 Serious warning – professional installation only!

Why is a qualified technician required to replace a compressor?

Replacing a compressor is a complex and dangerous professional job.
It should never be carried out independently or by an unqualified technician!

Unprofessional installation may cause:

• ❌ Danger of electric shock – High electrical voltage
• ❌ fire hazard – Working with flammable R600a gas
• ❌ gas leak – Environmental and health damage
• ❌ Irreversible damage to the freezer – Destruction of the cooling system
• ❌ Safety Cancellation – Use of a non-original part or faulty installation

Compressor replacement includes:

1. Safely discharging old refrigerant gas
2. Disconnecting and removing the old compressor
3. Soldering copper pipes
4. Installing the new compressor
5. Applying vacuum to the system
6. Filling refrigerant gas in precise quantities
7. Pressure and sealing tests
8. Checking for correctness and operation

We strongly recommend that you only use the services of a qualified official service technician.

📞 Click here to schedule a certified official service technician

Cost of a technician visit: 290 NIS

💡 Tip from the experts – How to extend the life of the compressor?

To maintain the compressor and prevent malfunctions:

• Ensure proper ventilation behind the freezer – a distance of at least 7 cm from the wall.
• Clean dust from the condenser coil (the black mesh at the back) once every six months.
• Avoid overloading with food that blocks airflow
• Do not open the door for a long time.
• Connect the freezer to a properly grounded outlet.

Technical

Frequently Asked Questions (FAQ)

❓ Is the compressor suitable for my freezer model?

Click on 'Check Model Compatibility' button at the top of the page and enter the model number of the freezer.
The system will immediately confirm if the part is suitable.

❓ Is this an original Blomberg compressor?

Yes, absolutely. This is an original Blomberg compressor, imported by the official importer.
We provide Only original parts To maintain the safety and integrity of the freezer.

❓ Can I replace the compressor myself?

No way. Replacing a compressor is a dangerous professional job that involves handling flammable refrigerant gas, soldering, and electrical work.
It is mandatory to contact a certified technician from the official service only.

📞 To schedule a certified technician, click here

❓ How much does it cost to replace a compressor?

The cost of a visit by a certified official service technician is 290 NIS.
The total cost of the work depends on the complexity of the installation and will be provided to you by the technician after diagnosis.

❓ How do I know if the problem is with the compressor?

Refrigeration faults can arise from various reasons – compressor, gas, thermostat, control card, and more.
Only a qualified technician Can accurately diagnose the source of the fault. Do not replace parts without professional diagnosis.

📞 To schedule a diagnosis and treatment, click here