Description

Original freezer compartment door seal for Haier 4-door refrigerator | 0060842451A

The original Haier door seal is designed to seal the freezer compartment in 4-door refrigerators from the HRF-456, HRF-550 and HRF-555 series.
A damaged seal allows warm air to enter the freezer compartment, causing ice buildup and increased electricity consumption.
Replacing an original part restores the hermetic seal and prevents further damage.

Is the door not closing properly? Is there ice on the sides of the freezer?

Is ice building up in the freezer compartment? Is food defrosting too quickly?
These are clear signs of a worn or cracked seal. To ensure a successful repair and maintain the integrity of the device,
It is mandatory to use only original parts.
Non-genuine parts may cause further damage and increase power consumption. Click the “Check Model Compatibility” button at the top of the page.

A worn gasket creates a gap between the door and the refrigerator body.
As a result, warm, humid air enters the freezer compartment and causes ice to accumulate on the interior walls.
In addition, the compressor has to work harder to maintain the desired temperature, which leads to a significant increase in electricity consumption.
Sometimes, the door open warning light also flashes for no apparent reason.

Other signs of a damaged seal include:
A door that opens too easily, one door slamming open the other, or feeling cold air escaping around the closed door.

✅ Why only an original part?

The original Haier seal contains an internal magnetic strip that creates a perfect vacuum between the door and the refrigerator body.
The manufacturer makes the gasket from flexible and durable rubber that is tested to work in extreme temperatures and for intensive daily use.
In contrast, unapproved substitutes may disintegrate quickly, not seal properly, or shrink over time.

Using an original gasket ensures the integrity of the device for years and saves on future repair costs.

📍 Where do you find the model number?

You will find the refrigerator's model number inside the refrigerator compartment, on the left wall at the top.
The model number is essential to verify part compatibility before ordering.

📋 Technical specifications

✅ Compatible models

The part fits the following models (make sure it matches the model number on the sticker):

• HRF-456FB
• HRF-456FGS
• HRF-550FB
• HRF-550FSS
• HRF-550FGS
• HRF-555FB

🔧 Installation instructions

⚠️ Unplug the refrigerator before starting work.

1. Open the freezer compartment door completely.
2. Locate the end of the old gasket and begin to gently pull it out of the groove.
3. Remove the old gasket along the entire perimeter of the door.
4. Clean the slot with a damp cloth and remove any remaining dirt.
5. Start inserting the new gasket from one of the top corners.
6. Gently press the gasket into the groove along the entire perimeter of the door.
7. Make sure the gasket is seated properly and there are no bulges or gaps.
8. Close the door and check that it seals properly.

Estimated time: 15 to 20 minutes.

Tools Required: No special tools required.

💡 Tip from the experts

To extend the life of the gasket, clean it every few months with a damp cloth and a little mild soap.
Regular cleaning prevents the accumulation of grease and dirt that damage the rubber's elasticity and sealing ability.
In our experience at Haier's official service laboratories, a well-maintained gasket lasts 5 to 7 years.

❓ Frequently Asked Questions

How do you know when the refrigerator door seal needs to be replaced?

Insert a thin sheet of paper between the door and the body of the refrigerator and close the door. If the paper falls off or comes off easily, the gasket is not sealing properly and should be replaced.
Another sign is ice buildup on the walls of the freezer compartment even though the door is closed.

How do you check if the refrigerator gasket is working properly?

Visually inspect the gasket: look for cracks, tears, or places where the rubber is warped or peeling.
Additionally, run your finger along the gasket and check for any hard or dry spots. A properly installed gasket should be flexible and uniform throughout its entire circumference.

How long does an original refrigerator gasket last?

A high-quality original gasket lasts between 5 and 7 years with normal use.
Factors that shorten the life of the seal include: opening the door too frequently, placing heavy objects on the door, and not cleaning the seal of grease and dirt residue.
Proper maintenance significantly extends the life of the component.

Can I replace the refrigerator gasket myself?

Yes, replacing a door seal is a relatively simple operation that does not require special tools or professional technical knowledge.
Most customers complete the replacement themselves within 15 to 20 minutes.
It is important to unplug the refrigerator before starting work and make sure that the new gasket is exactly matched to your model.

⏱️ Delivery times:

• Most localities: within 6 business days
• Golan Heights, Arava, Eilat and settlements beyond the Green Line: within 8 business days