Description

Original grill grid for Zanussi built-in oven | 140064006012

The original grill grid is suitable for built-in & freestanding ovens from the Zanussi and Electrolux series, measuring 466×385 mm.
A worn or bent grid impairs the stability of the pans and the uniform distribution of heat in the oven. A covered grid maintains the proper functioning of the baking chamber for years.

Is the grid wobbling? Are the pans unstable in the oven?

A crooked or rusty mesh causes molds to fall out and pots to not sit securely.
To Watch Over Device health And for uniform cooking on all levels, it is recommended to use only an original grid.
Non-genuine mesh may not fit the rails as precisely as required. Click the “Check Model Compatibility” button at the top of the page before ordering.

Why only an original network?

The oven rack is exposed to extremely high temperatures, and therefore must withstand constant heat load and the weight of heavy pans and pots.
The original grid is made of high-quality stainless steel that fits precisely into the side rails of the oven model.
Furthermore, the precise fit prevents scratches on the cell walls and unnecessary friction during movement.

📍 Model Locator Tip

The oven model number can be found on the inner door frame, when the door is fully open. The model number is essential for verifying network compatibility before ordering.

📋 Technical specifications

✅ Compatible models

The grid is suitable for the following built-in & freestanding oven models (it is recommended to ensure an exact fit against the sticker on the oven door):

• BPK264232M
• ZOB20607XK9
• ZOB32801XU
• ZOB35882XU
• ZOB35884XU
• ZOB35894XU
• ZOB35922XU
• ZOHCX3K2
• ZOHCX3W2
• ZOHKD4X1A
• ZOHNA7X1A
• ZOHNX3K1A
• ZOP37924XU
• ZOP37962XU
• ZOP37972XK
• ZOP38909XK
• ZOPKD7K1A

🔧 Installation instructions

⚠️ It is recommended to wait until the oven cools completely before replacing.

1. Open the oven door all the way.
2. Lift the old mesh slightly and carefully remove it from the rails.
3. Insert the new mesh into the same rails, making sure it sits straight on both sides.
4. Check that the net is stable and does not move when pulled lightly.

Estimated time: 2 minutes. Tools required: None.

💡 Tip from the experts

To extend the life of the mesh, clean it regularly from grease and burnt stains.
Dirt that burns onto stainless steel causes faster wear and can damage the coating over time.

❓ Frequently Asked Questions

How do I know which grid is suitable for my oven?

The existing mesh should be measured before ordering, as different models use close but not identical measurements.
This mesh is suitable for dimensions 466×385 mm only. Click the “Check Model Compatibility” button to verify exact fit for your model.

What do you do if the mesh is rusty or crooked?

Rust and curvature indicate wear of the material, so it is recommended to replace the mesh as soon as possible.
Using a damaged grid can cause molds to fall and impair uniform cooking. An original grid solves this immediately.

How do you clean black stains from an oven grate?

You can clean an oven grate with a mixture of baking soda and vinegar, which you soak for about 30 minutes before scrubbing.
This method is mostly effective for light grease stains, but a very worn mesh may require replacement.

Should the network be prepared for Passover?

Yes, according to halacha, a grid that is used to place food directly requires an incandescent light all the way to the ground.
Grids that are used only as a base for patterns require only light annealing. It is recommended to consult a rabbi regarding the exact method of annealing.