Description

Original left bottle holder for Haier 4-door refrigerator | 0060229613A

The bottle holder for the left door is an original Haier plastic component, designed for the HRF-456 series 4-door refrigerator.
The component holds bottles and large containers in the refrigerator compartment stably and securely.
A fracture in this part causes unstable storage and may cause bottles to fall.

Thousands of customers They already solved the exact same problem with this original part.
The certified technicians of the official service point out that this is one of the most common spare parts in the HRF-456 series,
Due to intensive daily use. Click the “Check Model Compatibility” button at the top of the page before ordering.

When should the bottle holder be replaced?

The bottle holder in the refrigerator door stands up to a lot of daily wear and tear. It holds drink bottles.
Juice containers and other products every time the door is opened and closed.
Over time, the plastic may break at the points where it attaches to the door, due to overload or natural wear and tear.

✅ Signs that indicate a need for replacement:
The part falls out of the door, visible cracks appear in the plastic, the holder shakes when the door is opened, or the products are unstable inside it.

✅ Why use only original parts?

The original Haier bottle holder is made of durable ABS plastic, suitable for low temperatures in the refrigerator compartment.
In addition, the dimensions of the original part are precisely matched to the connecting rails on the door of HRF-456 models.

✅ A non-original part may have different dimensions and may not connect properly.

⚠️ Installing an unapproved part may damage the integrity of the device and the quality of storage.

📋 Technical specifications

✅ Compatible models

The part fits the following models. Make sure it matches the model number on the device sticker:

• HRF-456FB
• HRF-456FGS
• HRF-456FSS
• HRF-456FW

⚠️ To check compatibility with additional models, click the “Check Model Compatibility” button at the top of the page.

🔧 Installation instructions

Replacing the bottle holder is a simple operation that does not require tools.

⚠️ Before replacing, remove all products from the old holder.

1. Open the left refrigerator compartment door completely.
2. Grasp both sides of the old holder, lift it up and pull it out.
3. Insert the new holder into the connecting rails in the door.
4. Press down until fully locked.
5. Check for stability by gently pressing on the part.

Estimated time: about 5 minutes. Tools required: none.

💡 Tip from the experts

To extend the life of the bottle holder, it is recommended not to load it beyond its intended capacity.
The bottle holder in the door carries the products every time the door is opened and closed, meaning dozens of times a day.
Therefore, storing particularly heavy containers over a long period of time may accelerate wear and tear.
Distributing the weight between different door holders will significantly extend the life of all components.

❓ Frequently Asked Questions

How do you replace a bottle holder in a Haier refrigerator?

Replace the bottle holder without the need for tools. First, empty the holder of all its contents.
Then, hold both sides, lift up and pull out.
The new part is inserted into the rails and pressed down until it locks. The operation takes about 5 minutes.

What causes refrigerator door shelves to break?

The fracture is usually caused by natural wear and tear of the plastic due to daily use, overload, or slamming the door with force.
Additionally, sustained low temperatures weaken non-genuine plastics over time.
An original part of the air conditioner is made of ABS plastic that is adapted to the conditions of the refrigerator and is more resistant to mechanical wear.

Does a broken bottle holder affect cooling?

A broken bottle holder does not directly affect cooling performance.
However, bottles dropped from the refrigerator can damage other components and cause secondary damage.
Also, a holder that falls off the door may prevent the door from closing properly, which will affect cooling.

How do you remove door hinges on an Air Conditioner refrigerator?

According to the manufacturer's instructions, place your hands on both sides of the rack, lift it up and pull it out.
To replace the rack, follow the steps in reverse order. It is important to make sure the rails are clean before replacing.

What is the difference between a left and right bottle holder?

The left bottle holder (part number 0060229613A) is intended for the left door of the refrigerator compartment.
The right holder is a separate part with a different part number.
Due to the different dimensions and connection geometry, one should not be interchanged with the other. It is important to specify the correct side when ordering.

⏱️ Delivery times:

• Most localities: within 6 business days
• Golan Heights, Arava, Eilat and settlements beyond the Green Line: within 8 business days