Description

Original Magimix Nylon Motor Shaft for Food Processor CS-4200 | 104990S

⚠️ Just before ordering – safety above all!
To ensure a successful repair and prevent repeated damage, it is essential to use only genuine parts.
A non-original axle may not fit the blades and cause damage to the engine.
Click on the button “Model Compatibility Check” At the top of the page for immediate approval.

The knife does not rotate even though the motor is running? Is the knife stuck on the spindle?
The original Magimix 104990S motor shaft is the direct solution to the worn shaft problem on the CS-4100, CS-4200 and CS-4200XL models.
The hinge is made of high-quality nylon, is 10 cm high, and comes with assembly instructions for simple self-replacement.

💎 Why switch to an original Magimix spindle?

• ✅ High quality original nylon – Exact match material for CS-4200 models
• ✅ 10 cm high – Precise dimensions for full compatibility
• ✅ Prevents repeated damage – Original hinge extends the life of the knives
• ✅ Assembly instructions included. – Easy self-replacement
• ✅ Original part only – No unapproved substitutes of any kind

⚠️ Please note – compatibility with knives and spindle version

The 104990S hinge fits the old white knives only.

💡 Our website also has the new upgraded axle – SKU 101321S (gray axle with reinforced drive wheel). Before ordering, check the color of the knives you have:

• White knives ← Order the current axis 104990S
• Gray knives ← Order the reinforced axle 101321S
• Device over 10 years old / recurring problem ← Upgrade to the full kit 17715 (Axis + Main Knife + Dough Knife)

🔧 How do you replace the axle?

Self-replacement is possible and relatively simple:

1. (I.e. Turn off the food processor. And completely unplugged
2. 🪛 Insert two flathead screwdrivers On both sides of the base of the axle and press down with equal pressure on both sides - the axle will release upwards.
3. (I.e. Align the new axle against the central metal hinge and slide it in
4. 🔨 Press gently. Until the hinge is fully inserted and stable
5. (I.e. Check the knives. Before reassembling – see tip below
6. 🧪 Activate for testing Without food before first use

💡 Tip from the experts: Before mounting the knives on the new shaft
Check that there is a seal inside the knife tube, dough knife and disc holder. Two flat wigs.
A worn part mounted on a new axle will quickly wear it out again and cause a repeat failure.

📋 Technical specifications

✅ Compatible models

💡 Not sure if your model is listed?
Click on the button “Model Compatibility Check” At the top of the page. The model sticker is located At the bottom of the food processor body.

💬 Frequently Asked Questions (FAQ)

Q: What is the difference between the 104990S axis and the 101321S axis?

A: 104990S is the old white hinge – suitable for white knives.
101321S is the upgraded gray shaft with a reinforced drive wheel – suitable for gray knives.
Check the color of your knives before ordering.

Q: Is the 104990S spindle suitable for my food processor?

A: Click on the button “Model Compatibility Check” At the top of the page for immediate approval.
Remember: This axis is suitable For white knives only.

Q: Is this a genuine Magimix part?

A: Absolutely. We are the official Magimix service provider in Israel and sell only original parts.

Q: Do I need to replace the knives along with the spindle?

A: If the white knives are in good condition, only the spindle can be replaced.
Yet, If the knives are worn or have defects – It is recommended to replace them as well.
A worn knife on a new spindle will quickly wear it out again.

Q: How long will it take for me to receive the order?

A: Deliveries arrive within 6 BUSINESS DAYS.
For the Golan Heights, the Arava, Eilat and settlements beyond the Green Line – within 8 BUSINESS DAYS.

Customers who purchased this part noted favorably that the food processor returned to full operation immediately after the replacement – ​​without the need for a technician.