Description

Original soap drawer for Bloomberg washing machine | 1926200100

Just before ordering – compatibility is everything!

Replacing a soap dispenser is easy, but only when you have the exact part for your machine. To avoid costly mistakes and ensure the part fits perfectly in your washing machine, Now click on the 'Check Model Compatibility' button. At the top of the page.
Our system will immediately confirm that the SKU 1926200100 is suitable for your Bloomberg washing machine.

Why is a damaged soap drawer a problem that should not be ignored?

The soap dispenser is much more than just a plastic holder. It is the critical interface between your detergents and the machine's water system.
When the soap drawer is cracked, broken, or covered in mold and soap residue that cannot be cleaned, the results can be:

• Water-resistant cleaning agent – The laundry will come out with stains and no scent.
• Water leaks from the drawer – Flooding around the machine and damage to the floor
• Bad odors and mold – Growth of bacteria that contaminate the laundry
• Wasting soap and conditioner – Expensive materials spilling out of the machine

Original Bloomberg soap drawer Made exactly according to the manufacturer's specifications, with the correct detergent, softener and bleach chambers,
And the durable materials that are designed to withstand humidity and high temperatures for years.

Why only an original part?

Aftermarket parts or generic replacements look similar, but the differences are critical:

Quality of materials

The original soap drawer is made of high-quality, heat- and moisture-resistant plastic that has undergone rigorous Bloomberg testing.
Non-genuine parts are often made of cheap plastic that cracks quickly, releases odors, or warps when exposed to hot water.

Matching accuracy

The original drawer fits exactly into the dispenser opening in your washing machine. Every groove, hole and pocket is in exactly the right place to ensure a smooth flow of detergent. A non-genuine part may be too loose, too tight, or have the openings in the wrong places – causing detergent to stay in the drawer instead of flowing into the drum.

Water system compatibility

The original soap drawer fits the unique siphon and drain system of Bloomberg machines.
Non-original parts can block or alter the water flow,
Which will cause soap residue, mold, or even engine burnout due to overload.

Easy and quick independent installation

One of the great advantages of the soap drawer is that it does not require a technician . It is a “plug and play” part that anyone can replace in just a few minutes:

1. Pull out the old drawer. – Press the gray tab at the top back of the drawer (as described in the Bloomberg manual) and pull out.
2. Clean the door. – Use a soft brush or cloth to remove soap residue from the compartment where the drawer sits.
3. Insert the new drawer. – Just push it in until you hear a “click” – that’s it!

No tools, screws, or a technician needed. 3 minutes and your machine is back to full operation.

How to find your model sticker?

To verify compatibility and be sure this SKU fits your washing machine, you will need the Model number of the machine.
On Bloomberg front-loading washing machines, the model sticker is usually located:

• On the inside of the door – Open the door and look for a sticker on the door frame or rubber.
• Behind the bottom panel – Remove the small panel at the bottom of the machine and you will find the sticker there.

The sticker will include the model number (such as BB7107UM or BB8107UM) and sometimes also the part number of the replacement parts.

Technical

• Manufacturer's SKU: 1926200100
• Brand: Blomberg
• Model compatibility: BB7107UM, BB8107UM
• Part type: Full Detergent Drawer
• Materials: Heat and moisture resistant plastic
• Including cells: Main soap, fabric softener, pre-wash chemical (depending on model)
• installation: Independent, without the need for a technician
• Estimated installation time: 3-5 minutes

FAQ

Q: How do I know it fits my machine?
A: Click the 'Check Model Compatibility' button at the top of the page. The system will recognize your model and confirm compatibility immediately.
Alternatively, check if your machine is a BB7107UM or BB8107UM model.

Q: Is this an original product?
A: Yes! This is an original Blomberg soap drawer, manufacturer part number 1926200100. This is not a replacement or generic part.

Q: Do I need a technician to install the drawer?
A: Absolutely not. This is a very simple installation that anyone can do in a few minutes.
Simply pull out the old drawer and push the new one in.

Q: How long does it take to receive the product?
A: Fast delivery to all over the country. Full details on delivery times can be found on the page The shipments.

Order now and get your washing machine back to perfect working order!