Description

Original top freezer compartment drawer lid for Bloomberg freezer | 4384643200

⚠️ Just before ordering – safety and perfect fit!

To ensure that the drawer lid fits snugly into place and maintains optimal insulation of the freezer compartment,
It is mandatory to use only original parts..
Non-original covers may cause damage to the insulation, excessive frost accumulation, and increased electricity consumption.

👆 Now click the 'Check Model Compatibility' button at the top of the page and our system will immediately confirm that the part is suitable for your freezer.

When should the drawer lid be replaced?

The top drawer lid on a Bloomberg freezer may break or crack over time.
From our experience at official service laboratories, these are the common signs that indicate a need for replacement:

✅ Cracks or fractures in plastic – damage from heavy objects or daily use

✅ Broken or loose handle – difficulty opening and closing the drawer

✅ Poor insulation – excessive frost accumulation in the freezer compartment

✅ Unusual noise – the lid does not close properly and makes noises

✅ Shape distortion – the lid does not fit properly in the frame

Why an original Bloomberg drawer lid?

Our certified technicians point out that there is a significant difference between original and non-original parts.
The original lid Made from food-grade plastic, resistant to extreme freezing temperatures down to minus 25 degrees Celsius.

Advantages of the original part:

✅ Precise fit – fits exactly into the frame without gaps

✅ Optimal thermal insulation – maintains a uniform temperature and prevents frost buildup

✅ Long-lasting durability – the original material is resistant to abrasion and breakage

✅ Maintaining the warranty – using an original part does not violate the warranty terms.

✅ Saving electricity – proper insulation reduces the workload on the compressor

⚠️ Important to know: Non-original parts may crack more quickly in freezing temperatures, damage the cell's insulation, and cause a significant increase in electricity consumption.

How do you find the model number on a Bloomberg freezer?

To ensure a perfect fit, locate the model sticker on your freezer.
In the Bloomberg freezersThe sticker is usually located in one of the following places:

1. On the inner wall – On the left or right side of the freezer compartment
2. Under the top drawer – On the inner frame
3. On the back of the device – On the technical data plate

Look for the model number starting with FNT and write it down before ordering.

Simple self-installation

Replacing a drawer lid is a simple task that can be done at home. No need for special tools.
The process only takes about 5 minutes:

1. Take out the drawer. From the freezer compartment
2. Loosen the old lid. From the rails (light pressure on the sides)
3. Install the new lid. By inserting it into the rails until it clicks
4. Check That the lid closes and opens smoothly

💡 Expert tip: Before installation, clean the rail area of ​​frost and dirt to ensure smooth assembly.

Preventive maintenance tips

To extend the life of the lid and prevent future breakage:

📦 Do not place heavy objects on the lid when the drawer is open.

🧽 Clean the lid with a damp cloth once a month.

🔎 Check the condition of the seals around the freezer compartment once a year.

🚫 Avoid closing the drawer forcefully

⭐ Customers who purchased this part praised the ease of installation and the perfect fit for the freezer.

Technical

Compatible models

The lid is suitable for Bloomberg freezers from the following series:

• FNT3666
• FNT3668
• FNT3674
• FNT3677
• FNT3678
• FNT3684
• FNT9673

👆 Please note: Before ordering, click the 'Check Model Compatibility' button at the top of the page to make sure the part fits your freezer exactly.

FAQ

Does the lid fit my freezer model?

Click the 'Check Model Compatibility' button at the top of the page. Our system will confirm within seconds if the part fits your freezer.

Is this an original Bloomberg piece?

Yes, this is an original spare part (OEM) manufactured by Bloomberg. We are the official importer and only supply original parts.

Can I replace the lid myself?

Absolutely! The replacement is very simple and does not require any tools or technical knowledge. The process only takes about 5 minutes.

How often should the lid be replaced?

The original lid is designed to last the life of the freezer. Replacement is only required in the event of a break, crack, or other physical damage.

What happens if I use a non-original lid?

A non-original cover may not fit the frame exactly, damage the thermal insulation, lead to excessive frost accumulation, and even violate the warranty terms.